Didn’t find the answer you were looking for?

What causes oscillation in improperly tuned PID controllers?

Asked on Nov 15, 2025

Answer

Oscillation in improperly tuned PID controllers typically arises from incorrect parameter settings that lead to instability in the control loop. This can occur when the proportional, integral, or derivative gains are not balanced correctly, causing the system to overreact to errors or not react quickly enough, resulting in sustained oscillations.

Example Concept: In a PID controller, oscillations often occur when the proportional gain (Kp) is too high, causing the system to overshoot and oscillate around the setpoint. Additionally, if the integral gain (Ki) is too high, it can lead to accumulated error correction that overshoots the setpoint, while an excessively high derivative gain (Kd) can amplify noise, leading to instability. Proper tuning involves balancing these gains to achieve a stable response without oscillation.

Additional Comment:

Start with setting a moderate Kp to reduce initial oscillations.
Adjust Ki to eliminate steady-state error without causing overshoot.
Use Kd to dampen oscillations and improve system stability.
Consider using tuning methods like Ziegler-Nichols for systematic gain adjustment.
Simulate the control system to test different gain settings before deployment.

✅ Answered with Robotics best practices.

Didn’t find the answer you were looking for?

What causes oscillation in improperly tuned PID controllers?

Asked on Nov 15, 2025

Answer

The Q&A Network